6 Ways To Charge And Maintain Car Battery

Category: Care & Repair 11 0

Is your car battery on low power? If you think you need replacement, you might probably be mistaken. There are recommended charging and maintenance tips you can try to keep your car battery working at full power. Here we go.

  1. Read the manual.

Before you charge your car battery, make sure to read the owner’s manual as well as the car battery manual for further instruction. Don’t forget to review the safety instruction to avoid untoward incident during charging of car battery Sydney.

  1. Keep safety charging in mind.

Do take note that car batteries are designed with sulfuric acid and hydrogen oxygen gases that could be harmful when improperly handled. When charging, don’t forget the following pointers:

  • Be sure that the car battery terminals have no specs of dirt and corrosion.
  • Don’t charge a car battery that is dried out. But if it required, make sure to add a potable water above the car batter plates.
  • Check with the instruction manual for safe charging.
  • Locate the positive and negative terminals and connect the correct leads.
  • If you are charging a battery that is connected to your vehicle, make sure that your car’s electrical system has been designed with anti-overvoltage feature so it won’t damage the system.
  1. Maximize battery storage.

For storage, the most important tip is to make sure that the car battery won’t drop as low as 12.4 volts. There’s a decent of simple procedures on battery maintenance to prolong of your car’s battery. Say for instance, one of the best ways to avoid damage of car or motorcycle battery in Sydney is through the use of a battery maintainer. It’s a device that regulates the car battery to its finest during storage.

  1. Use maintenance chargers.

You can choose between two types of chargers. First, the traditional ‘float’ maintenance charger yields constant voltage along with a tapering amperage to the car battery when it’s completely charged. The range usually falls somewhere between 13.0 volts to 13.8 volts. Second, an automatic multistage charger works to monitor the car batter and then charge it whenever needed. This type of chargers works at different amperage and voltages.

  1. Disconnect when not in use.

Another alternative to using a maintenance charger in preventing damage is to disconnect the battery from your car when it is stored. It is advisable to give it a full charge before storing it. Then, check the voltage twice or thrice a year and check it falls lower than 12.4 volts.

  1. Keep it clean and keep an eye for leakage and corrosion.

Always make sure that your car battery is snug, clean and free from elements. Look for signs of leakage and corrosions such because it could mean that the level of performance of your battery is already lower than what it should be. Unplug extra accessories and turn lights off when you don’t use your car. Lastly, store the battery in cool places as much as possible.

Whenever your car battery fails to work at its best, then don’t think of replacement right away. There could be some ways to enhance its performance and life. Try these recommended steps to charge and maintain your car battery and check out how long it would last.

Related Articles

Add Comment